| Engine
Diagnostics |
| Complete Test:
10-step preprogrammed procedure that includes visual inspections, cranking tests, high and
low cruise tests, idle tests, initial timing tests, kV tests and power balance tests. |
| Custom Tests:
Individual tests from the Complete Test are available individually or in groups for
area testing. |
| Full Diagnostics:
Available with the Complete Test and can be performed on individual tests from
Custom Testing. |
| Post Test Options: Include
data review, diagnostic messages, data storage and printed reports, including
technician diagnostics, customer diagnostics, inspections and test data. |
|
| Pinpoint Tests |
| Engine Data:
Live readings of RPM, dwell, coil+, coil-, volts, ripple, duty cycle, timing,
vacuum, timing, amps, A/F ratio, HC, CO, CO2, O2. |
| Multimeter: High
impedance measurements of DC volts, ohms, continuity, duty cycle, low amps and frequency. |
| Emissions Digital: Live
exhaust gas readings. |
| Emissions
Graphic: 5-minute graph of exhaust gas measurements with digital readings. |
| Idle Stability:
Per cylinder RPM deviation as a dynamic bar graph. |
| Dynamic kV: Live
firing kV, spark kV, spark duration and kV change readings. |
| Rapid Power Balance:
Non-intrusive power balance for distributorless ignitions. |
| Cylinder Shorting: Power
balance for non-DIS systems. |
| Catalytic Converter
Efficiency (optional): C02 and HC graph with pass/fail indicator. |
| OBD II Trouble Code
Read (optional): Displays OBD II trouble code read and descriptions. |
|
|
| Sun
Scope |
| Ignition Scope: Waveforms
in parade, milliseconds, raster, cylinder. |
| Lab Scope: Dual
channel voltages. |
| Multifunction Scope:
Ignition/lab scope combination. |
| Single Lead Scope
(Direct Systems): Collects waveforms from each cylinder. |
| Alternator Display: Display
of alternator ripple. |
| O2 Sensor
Activity: Automated oxygen sensor test. |
| Vacuum: Per
cylinder vacuum waveform using standard probe accessory. |
| Low
Amps: Low amps waveform display with standard probe accessory. |
| Pattern Viewer: View
user-stored patterns. |
| Personal Scope
Configurations: Store frequently used scope settings. |
| Chart Recorder: Chart
patterns over long time scales (1-20s). |
| Single Lead Ignition
Scope: For quick ignition checks using one lead. |
| Histograms: Firing
history, spark history, amplitude (voltage), duty cycle, pulse width, injector pulse
width. |
| Pressure Waveforms
(optional): Traces with digital PSI measurements from individual components. |
